Chemicals & Materials Now!

From basic to specialty, and everything in between

Select category
Search this blog

Three Phases of Safety: The Safety Life Cycle in the Lab

Posted on January 26th, 2017 by in Chemical Manufacturing Excellence

Lab safety

“A pint of sweat will save a gallon of blood.”  George S. Patton, Jr.


The quote I intended to open with was “A good plan, well executed, is better than a perfect plan, poorly executed,” but when I checked, that’s not what General Patton said.  What he said was “A good plan, violently executed now, is better than a perfect plan next week.”  Somehow, talking about the safety life cycle in the laboratory as a violently executed plan seemed, well, inappropriate.  On the other hand, the effort of sustaining a safe laboratory unquestionably makes a difference and it can literally save gallons of blood.  Moreover, if you are part of the chemical enterprise and you work in a lab, the blood saved could very well be your own.

The Safety Life Cycle

A really useful framework for considering safety in an ongoing enterprise is the safety life cycle.  The safety life cycle consists of three phases:  analysis, implementation, and operation.

Analysis is the phase of the safety life cycle where hazards are identified, risk is assessed, and risk reduction measures determined.  Implementation (or “realization,” for my British colleagues) is the phase of the safety life cycle where the risk reduction measures are designed, built, installed, and most importantly, where personnel are trained on the operation of those risk reduction measures and on the hazards against which they protect.  Operation, the phase of the safety life cycle in which the lab spends the vast majority of its time, is where the work of the laboratory is done.  The safety tasks during the operation phase of the safety life cycle include operating safely, testing and inspection, maintenance, continued training, and safe modification and decommissioning.

Most of the literature around the safety life cycle focuses on automated safety systems for taking a process safe state, which are typically known as safety instrumented systems (SIS) and are designed, installed, and cared for by instrument and controls engineers.  The safety life cycle was not the creation of I&C engineers, but it has been championed by them as part of their work with SIS.  For the most part, an SIS is not part of the laboratory environment.  Work at the bench scale simply does not rely on automated safety instrumented functions, operated through sophisticated safety logic solvers located in multi-million dollar control rooms to take a process to a safe state when an unsafe condition is detected.  Instead, work at the bench scale relies on safe experimental design and safety-aware laboratory technicians and scientists.  Yet, even the laboratory can benefit from applying the principals of the safety life cycle.

The Analysis Phase

The safety life cycle graphic shows eight tasks as part of the analysis phase.  Adapted to the laboratory, they are

  • Experiment Design
  • Hazard Identification
  • Risk Assessment
  • Comparison to Risk Tolerance Criteria
  • Risk Reduction Allocation
  • Safety Function Definition
  • Safety Function Specification
  • Reliability Verification

A few key ideas should come out of this list:  Hazards cannot be identified until there is first a solid idea of what the experiment is supposed to accomplish and how.  Risk assessment cannot happen until specific hazards are identified.  Risk cannot be zero; there will always be some level of risk and the risk that is “low enough” should be defined in advance.  When the risk is not low enough, something must be done about it and since nothing is perfect, it is important to determine how reliable each risk reduction measure can be.

The best means for identifying hazards is a process hazards analysis (PHA).  Laboratories are not required to comply with OSHA’s process safety management standard, but it is still a valuable tool and is found in 29 CFR 1910.119.  One of the PHA methods listed by OSHA, and the one most likely to be useful in the laboratory, is the checklist.  A good resource for laboratory checklists is the 2017 UCLA Chemical Hygiene Plan, just published by the University of California-Los Angeles, home of the University of California Center for Laboratory Safety.

The Implementation (Realization) Phase

The safety lifecycle graphic shows nine tasks in the implementation phase:

  • Equipment design
  • Software configuration
  • Equipment build
  • Factory Acceptance Testing
  • Construction/Installation
  • Site Acceptance Testing
  • Validation
  • Training
  • Pre-Startup Safety Review

Laboratory equipment needs to be designed, built, installed, and programmed to achieve the safety objectives of the work, as well as the experimental objectives.  This includes equipment specific to the experimental program, as well as general equipment such as fume hoods, fire suppression equipment, and safety showers.

Lab safety 2


Just as importantly, equipment needs to be tested before being put into service.  Does each piece of equipment work the way it is supposed to?  Do the pieces all work together the way they are supposed to?  If there are problems with the design, construction, installation, or programming—and there are always problems—the time to discover them is before hazards are introduced.

The Operation Phase

One of the most insidious problems with safety programs is their misplaced reliance on slogans, like “Safety First.”  What does that mean?  Get safety out of the way first, so you can get on with the real work?  If that’s the case, then the analysis phase of the safety lifecycle should pretty much take care of safety. While most of the literature about the safety lifecycle focuses its attention on analysis, the operation phase is where the safety lifecycle spends the most time.

The safety lifecycle graphic shows seven tasks in the implementation phase:

  • Operation
  • Training
  • Proof Testing
  • Inspection
  • Maintenance
  • Management of Change
  • Decommissioning

Operating procedures need to address how to do normal tasks safely, but just as importantly, they need to address how to do abnormal tasks safely.  Moreover, the best procedures are useless if the personnel using them do not understand them or do not follow them, so training is a continuing requirement.

The two areas of gravest concern in a laboratory, however, are maintenance and management of change.

The UCLA Laboratory Inspection Checklist is an excellent resource for maintaining a laboratory in a safe condition.  It is not enough to build a safe experimental program; it has to remain safe.  Since everything fails, it’s important to diligently keep things in good operating condition.  The second law of thermodynamics says that broken equipment will not fix itself.  Regarding tests and inspections, it is important to remember that in the time immediately following a proof test, a piece of safety equipment will work.  Either it was working before the test and it will still be working immediately after the test, or it was not working, and IT WAS IMMEDIATELY REPAIRED.  Inspection and testing without repair is of no value in keeping a laboratory safe.  Keeping to the inspection and testing schedule is just as important.

Management of change is also very important, especially in a laboratory environment.  Change is a way of life in the laboratory, and the concerns about managing change do not go away just because it happens all the time.  Changes can inadvertently introduce new hazards or inadvertently remove existing safeguards, and so should only be made after considering their impact on safety and health.

Sweat for Blood

The safety life cycle was not developed for the laboratory, yet it provides a framework that is just as applicable at the gram scale as it is railcar scale, even if it differs in the details.  Until your laboratory is applying all three phases of the safety life cycle—analysis, implementation, and operation—to its activities, it is missing out on an easy opportunity to stay safe.  Take a look at your safety practices.  Have they focused on analysis, while neglecting implementation and operation?  Have they concentrated on operation without devoting the time and energy required for good analysis?

It is always the right time to do the right thing. If you have not used the safety life cycle approach before, consider it now.  Violent execution is not required.  It will take some sweat, but the blood that you save may be your own.

Share Your Experiences

Something that makes safety real for others is shared experiences.  Everyone learns from experience, but it does not necessarily have to be their own.  In industry, there is a long tradition of exchanging stories about near misses and safety events.  This is not so much the case in the laboratory environment.  It is not because near misses and safety events do not occur; we simply do not talk about them.  Share your experiences and comment here.  We would be especially interested to hear comments about instances where analysis, implementation, or operational items from the safety life cycle saved someone in your laboratory from serious harm.


All opinions shared in this post are the author’s own.

R&D Solutions for Chemicals & Materials

We're happy to discuss your needs and show you how Elsevier's Solution can help.

Contact Sales